Public water system · MN1190010
ActiveHampton
At a glance
Hampton (PWSID MN1190010) is an active community water system in Dakota County, Minnesota. It reports serving 691 people through 251 service connections. Its primary water source is groundwater, and EPA lists it as owned by a local government. EPA's records list 3 violations for this system; all are health-based, and the most recent began in January 2016.
Dataset updated . Source: EPA SDWIS/ECHO public records.
Population served
691
Service connections
251
Primary source
GW
Groundwater
System type
CWS
Community water system
System record
How does Hampton compare with other water systems in Dakota County?
By EPA's size categories, Hampton is a small system (501 to 3,300 people). Dakota County has 134 active public water systems. Its population served is well below the county average of 2,920 people per system, and accounts for 0.2% of the 391,319 people reported by systems filed under the county. Across Minnesota, the 6,465 active systems average 820 people each. Nationally, the average active community water system reports serving 6,703 people, so Hampton is well below that figure.
What does “community water system” mean?
A community water system serves at least 15 connections used by year-round residents, or regularly serves at least 25 year-round residents. Homes, apartments and mobile-home parks are served by these. Minnesota has 987 active community water systems, 15% of the state's 6,465 active systems. Groundwater means the system draws its water from wells or springs fed by underground aquifers. 6,261 Minnesota systems (97%) list groundwater as their primary source.
Who owns and regulates Hampton?
EPA lists Hampton as owned by a local government. The MN state drinking water program is its primacy agency, the regulator with primary enforcement responsibility for the system under the Safe Drinking Water Act. 33 of the 134 active systems in Dakota County (25%) are also owned by a local government.
Does Hampton have drinking water violations?
EPA's records list 3 violations for this system; all are health-based, and the most recent began in January 2016. The violations listed here began between July 2001 and January 2016. By type: 3 contaminant level above the legal limit. The contaminant or rule involved most often is Total coliform bacteria (TCR) (3 of them). EPA lists 3 as resolved. Resolved means at least one resolving action is on record: the system returned to compliance, the rule no longer applies, or no further action was needed.
| Began | Violation | Contaminant or rule | Health-based | Status |
|---|---|---|---|---|
| 2016-01-01 | Contaminant level above the legal limitMaximum Contaminant Level Violation, Monthly (TCR) · code 22 | Total coliform bacteria (TCR)code 3100 | Yes | Resolved |
| 2002-07-01 | Contaminant level above the legal limitMaximum Contaminant Level Violation, Monthly (TCR) · code 22 | Total coliform bacteria (TCR)code 3100 | Yes | Resolved |
| 2001-07-01 | Contaminant level above the legal limitMaximum Contaminant Level Violation, Monthly (TCR) · code 22 | Total coliform bacteria (TCR)code 3100 | Yes | Resolved |
All 3 violations in EPA's records, newest first.Labels and codes come from EPA's SDWIS reference tables. A monitoring or reporting violation means a required test or report was missed or late; it does not by itself mean a contaminant was found. "Health-based" marks violations of a legal limit or required treatment.
Hampton: frequently asked questions
Who runs Hampton?
Hampton (PWSID MN1190010) is a community water system owned by a local government. It is regulated by the MN state drinking water program.
How many people does Hampton serve?
Hampton reports serving 691 people through 251 service connections in Dakota County, Minnesota.
Where does Hampton get its water?
EPA SDWIS lists this system's primary water source as groundwater. Groundwater means the system draws its water from wells or springs fed by underground aquifers.
Does Hampton have any drinking water violations?
EPA's records list 3 violations for this system; all are health-based, and the most recent began in January 2016. A monitoring or reporting violation means a required test or report was missed or late; it does not by itself mean a contaminant was found.
Is Hampton's water safe to drink?
AquaCensus shows EPA compliance records, not current water test results, so it cannot say whether the water is safe at a given moment. EPA's records list 3 violations for this system; all are health-based, and the most recent began in January 2016. For current results, consult the system's annual water quality report, EPA ECHO, or the MN state drinking water program.
Where can I find Hampton's water quality report?
As a community water system, Hampton must deliver an annual water quality report, called a Consumer Confidence Report, to its customers by July 1 each year, covering the previous calendar year. The system can provide a copy on request.
Other water systems in Dakota County
| Water system | County | Population served | Type | Source |
|---|---|---|---|---|
| Eagan | Dakota | 68,223 | Community | Groundwater |
| Lakeville | Dakota | 67,300 | Community | Groundwater |
| Burnsville | Dakota | 61,747 | Community | Surface water |
| Apple Valley | Dakota | 50,300 | Community | Groundwater |
| Inver Grove Heights | Dakota | 34,189 | Community | Groundwater |
| Rosemount | Dakota | 26,500 | Community | Groundwater |
Related pages
Working with water-system records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.
About this data
Source: U.S. EPA Safe Drinking Water Information System (SDWIS) and SDWA violation records, via EPA ECHO, as published October 1, 2026 — AquaCensus refreshes it quarterly. See the methodology for how records are matched, cleaned and scored.
Cite as: AquaCensus, “Hampton, PWSID MN1190010, Minnesota”, https://aquacensus.com/water-systems/minnesota/hampton-mn1190010 (data as of October 1, 2026).