Public water system · MN1700024
ActiveStonebrooke Addition I
At a glance
Stonebrooke Addition I (PWSID MN1700024) is an active community water system in Scott County, Minnesota. It reports serving 100 people through 34 service connections. Its primary water source is groundwater, and EPA lists it as privately owned. EPA's records list 2 violations for this system; none is health-based, and the most recent began in January 2021.
Dataset updated . Source: EPA SDWIS/ECHO public records.
Population served
100
Service connections
34
Primary source
GW
Groundwater
System type
CWS
Community water system
System record
How does Stonebrooke Addition I compare with other water systems in Scott County?
By EPA's size categories, Stonebrooke Addition I is a very small system (500 people or fewer). Scott County has 111 active public water systems. Its population served is well below the county average of 1,199 people per system, and accounts for less than 0.1% of the 133,099 people reported by systems filed under the county. Across Minnesota, the 6,465 active systems average 820 people each. Nationally, the average active community water system reports serving 6,703 people, so Stonebrooke Addition I is well below that figure.
What does “community water system” mean?
A community water system serves at least 15 connections used by year-round residents, or regularly serves at least 25 year-round residents. Homes, apartments and mobile-home parks are served by these. Minnesota has 987 active community water systems, 15% of the state's 6,465 active systems. Groundwater means the system draws its water from wells or springs fed by underground aquifers. 6,261 Minnesota systems (97%) list groundwater as their primary source.
Who owns and regulates Stonebrooke Addition I?
EPA lists Stonebrooke Addition I as privately owned. The MN state drinking water program is its primacy agency, the regulator with primary enforcement responsibility for the system under the Safe Drinking Water Act. 87 of the 111 active systems in Scott County (78%) are also privately owned.
Does Stonebrooke Addition I have drinking water violations?
EPA's records list 2 violations for this system; none is health-based, and the most recent began in January 2021. The violations listed here began between January 2012 and January 2021. By type: 2 monitoring and reporting. The contaminant or rule involved most often is Lead and Copper Rule (2 of them). EPA lists 2 as resolved. Resolved means at least one resolving action is on record: the system returned to compliance, the rule no longer applies, or no further action was needed.
| Began | Violation | Contaminant or rule | Health-based | Status |
|---|---|---|---|---|
| 2021-01-01 | Monitoring and reportingLead Consumer Notice · code 66 | Lead and Copper Rulecode 5000 | No | Resolved |
| 2012-01-01 | Monitoring and reportingLead Consumer Notice · code 66 | Lead and Copper Rulecode 5000 | No | Resolved |
All 2 violations in EPA's records, newest first.Labels and codes come from EPA's SDWIS reference tables. A monitoring or reporting violation means a required test or report was missed or late; it does not by itself mean a contaminant was found. "Health-based" marks violations of a legal limit or required treatment.
Stonebrooke Addition I: frequently asked questions
Who runs Stonebrooke Addition I?
Stonebrooke Addition I (PWSID MN1700024) is a community water system privately owned. It is regulated by the MN state drinking water program.
How many people does Stonebrooke Addition I serve?
Stonebrooke Addition I reports serving 100 people through 34 service connections in Scott County, Minnesota.
Where does Stonebrooke Addition I get its water?
EPA SDWIS lists this system's primary water source as groundwater. Groundwater means the system draws its water from wells or springs fed by underground aquifers.
Does Stonebrooke Addition I have any drinking water violations?
EPA's records list 2 violations for this system; none is health-based, and the most recent began in January 2021. A monitoring or reporting violation means a required test or report was missed or late; it does not by itself mean a contaminant was found.
Is Stonebrooke Addition I's water safe to drink?
AquaCensus shows EPA compliance records, not current water test results, so it cannot say whether the water is safe at a given moment. EPA's records list 2 violations for this system; none is health-based, and the most recent began in January 2021. For current results, consult the system's annual water quality report, EPA ECHO, or the MN state drinking water program.
Where can I find Stonebrooke Addition I's water quality report?
As a community water system, Stonebrooke Addition I must deliver an annual water quality report, called a Consumer Confidence Report, to its customers by July 1 each year, covering the previous calendar year. The system can provide a copy on request.
Other water systems in Scott County
| Water system | County | Population served | Type | Source |
|---|---|---|---|---|
| Shakopee | Scott | 47,000 | Community | Groundwater |
| Savage | Scott | 30,285 | Community | Purchased surface water |
| Prior Lake | Scott | 25,282 | Community | Groundwater |
| Belle Plaine | Scott | 7,456 | Community | Groundwater |
| Jordan | Scott | 6,700 | Community | Groundwater |
| Elko New Market | Scott | 5,003 | Community | Groundwater |
Related pages
Working with water-system records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.
About this data
Source: U.S. EPA Safe Drinking Water Information System (SDWIS) and SDWA violation records, via EPA ECHO, as published October 1, 2026 — AquaCensus refreshes it quarterly. See the methodology for how records are matched, cleaned and scored.
Cite as: AquaCensus, “Stonebrooke Addition I, PWSID MN1700024, Minnesota”, https://aquacensus.com/water-systems/minnesota/stonebrooke-addition-i-mn1700024 (data as of October 1, 2026).