Public water system · WA53AD018
ActiveLakeview
At a glance
Lakeview (PWSID WA53AD018) is an active community water system in Franklin County, Washington. It reports serving 50 people through 6 service connections. Its primary water source is groundwater, and EPA lists it as privately owned. EPA's records list one violation for this system; it is health-based, and the most recent began in January 2024.
Dataset updated . Source: EPA SDWIS/ECHO public records.
Population served
50
Service connections
6
Primary source
GW
Groundwater
System type
CWS
Community water system
System record
How does Lakeview compare with other water systems in Franklin County?
By EPA's size categories, Lakeview is a very small system (500 people or fewer). Franklin County has 80 active public water systems. Its population served is well below the county average of 1,644 people per system, and accounts for less than 0.1% of the 131,535 people reported by systems filed under the county. Across Washington, the 4,705 active systems average 2,172 people each. Nationally, the average active community water system reports serving 6,703 people, so Lakeview is well below that figure.
What does “community water system” mean?
A community water system serves at least 15 connections used by year-round residents, or regularly serves at least 25 year-round residents. Homes, apartments and mobile-home parks are served by these. Washington has 2,392 active community water systems, 51% of the state's 4,705 active systems. Groundwater means the system draws its water from wells or springs fed by underground aquifers. 4,370 Washington systems (93%) list groundwater as their primary source.
Who owns and regulates Lakeview?
EPA lists Lakeview as privately owned. The WA state drinking water program is its primacy agency, the regulator with primary enforcement responsibility for the system under the Safe Drinking Water Act. 67 of the 80 active systems in Franklin County (84%) are also privately owned.
Does Lakeview have drinking water violations?
EPA's records list one violation for this system; it is health-based, and the most recent began in January 2024. By type: 1 contaminant level above the legal limit. The contaminant or rule involved is Nitrate. EPA lists 1 as resolved. Resolved means at least one resolving action is on record: the system returned to compliance, the rule no longer applies, or no further action was needed.
| Began | Violation | Contaminant or rule | Health-based | Status |
|---|---|---|---|---|
| 2024-01-01 | Contaminant level above the legal limitMaximum Contaminant Level Violation, Single Sample · code 01 | Nitratecode 1040 | Yes | Resolved |
The one violation in EPA's records.Labels and codes come from EPA's SDWIS reference tables. A monitoring or reporting violation means a required test or report was missed or late; it does not by itself mean a contaminant was found. "Health-based" marks violations of a legal limit or required treatment.
Lakeview: frequently asked questions
Who runs Lakeview?
Lakeview (PWSID WA53AD018) is a community water system privately owned. It is regulated by the WA state drinking water program.
How many people does Lakeview serve?
Lakeview reports serving 50 people through 6 service connections in Franklin County, Washington.
Where does Lakeview get its water?
EPA SDWIS lists this system's primary water source as groundwater. Groundwater means the system draws its water from wells or springs fed by underground aquifers.
Does Lakeview have any drinking water violations?
EPA's records list one violation for this system; it is health-based, and the most recent began in January 2024. A monitoring or reporting violation means a required test or report was missed or late; it does not by itself mean a contaminant was found.
Is Lakeview's water safe to drink?
AquaCensus shows EPA compliance records, not current water test results, so it cannot say whether the water is safe at a given moment. EPA's records list one violation for this system; it is health-based, and the most recent began in January 2024. For current results, consult the system's annual water quality report, EPA ECHO, or the WA state drinking water program.
Where can I find Lakeview's water quality report?
As a community water system, Lakeview must deliver an annual water quality report, called a Consumer Confidence Report, to its customers by July 1 each year, covering the previous calendar year. The system can provide a copy on request.
Other water systems in Franklin County
| Water system | County | Population served | Type | Source |
|---|---|---|---|---|
| Pasco Water Department | Franklin | 115,102 | Community | Surface water |
| Connell City of | Franklin | 5,150 | Community | Groundwater |
| Basin City Water Sewer District | Franklin | 1,740 | Community | Groundwater |
| Lamb-Weston Pasco | Franklin | 620 | Non-transient non-community | Groundwater |
| Pasco Port of 210 | Franklin | 500 | Non-transient non-community | Purchased surface water |
| Mesa Water Department | Franklin | 495 | Community | Groundwater |
Related pages
Working with water-system records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.
About this data
Source: U.S. EPA Safe Drinking Water Information System (SDWIS) and SDWA violation records, via EPA ECHO, as published October 1, 2026 — AquaCensus refreshes it quarterly. See the methodology for how records are matched, cleaned and scored.
Cite as: AquaCensus, “Lakeview, PWSID WA53AD018, Washington”, https://aquacensus.com/water-systems/washington/lakeview-wa53ad018 (data as of October 1, 2026).