Public water system · WA5314730
ActiveRainwood
At a glance
Rainwood (PWSID WA5314730) is an active community water system in Thurston County, Washington. It reports serving 48 people through 18 service connections. Its primary water source is groundwater, and EPA lists it as privately owned. EPA's records list 2 violations for this system; none is health-based, and the most recent began in July 2020.
Dataset updated . Source: EPA SDWIS/ECHO public records.
Population served
48
Service connections
18
Primary source
GW
Groundwater
System type
CWS
Community water system
System record
How does Rainwood compare with other water systems in Thurston County?
By EPA's size categories, Rainwood is a very small system (500 people or fewer). Thurston County has 322 active public water systems. Its population served is well below the county average of 1,233 people per system, and accounts for less than 0.1% of the 397,060 people reported by systems filed under the county. Across Washington, the 4,705 active systems average 2,172 people each. Nationally, the average active community water system reports serving 6,703 people, so Rainwood is well below that figure.
What does “community water system” mean?
A community water system serves at least 15 connections used by year-round residents, or regularly serves at least 25 year-round residents. Homes, apartments and mobile-home parks are served by these. Washington has 2,392 active community water systems, 51% of the state's 4,705 active systems. Groundwater means the system draws its water from wells or springs fed by underground aquifers. 4,370 Washington systems (93%) list groundwater as their primary source.
Who owns and regulates Rainwood?
EPA lists Rainwood as privately owned. The WA state drinking water program is its primacy agency, the regulator with primary enforcement responsibility for the system under the Safe Drinking Water Act. 237 of the 322 active systems in Thurston County (74%) are also privately owned.
Does Rainwood have drinking water violations?
EPA's records list 2 violations for this system; none is health-based, and the most recent began in July 2020. The violations listed here began between January 2005 and July 2020. By type: 1 public notice, recordkeeping or other and 1 monitoring and reporting. The contaminants or rules involved are Consumer Confidence Rule and Diquat. EPA lists 2 as resolved. Resolved means at least one resolving action is on record: the system returned to compliance, the rule no longer applies, or no further action was needed.
| Began | Violation | Contaminant or rule | Health-based | Status |
|---|---|---|---|---|
| 2020-07-01 | Public notice, recordkeeping or otherConsumer Confidence Report Complete Failure to Report · code 71 | Consumer Confidence Rulecode 7000 | No | Resolved |
| 2005-01-01 | Monitoring and reportingMonitoring, Regular · code 03 | Diquatcode 2032 | No | Resolved |
All 2 violations in EPA's records, newest first.Labels and codes come from EPA's SDWIS reference tables. A monitoring or reporting violation means a required test or report was missed or late; it does not by itself mean a contaminant was found. "Health-based" marks violations of a legal limit or required treatment.
Rainwood: frequently asked questions
Who runs Rainwood?
Rainwood (PWSID WA5314730) is a community water system privately owned. It is regulated by the WA state drinking water program.
How many people does Rainwood serve?
Rainwood reports serving 48 people through 18 service connections in Thurston County, Washington.
Where does Rainwood get its water?
EPA SDWIS lists this system's primary water source as groundwater. Groundwater means the system draws its water from wells or springs fed by underground aquifers.
Does Rainwood have any drinking water violations?
EPA's records list 2 violations for this system; none is health-based, and the most recent began in July 2020. A monitoring or reporting violation means a required test or report was missed or late; it does not by itself mean a contaminant was found.
Is Rainwood's water safe to drink?
AquaCensus shows EPA compliance records, not current water test results, so it cannot say whether the water is safe at a given moment. EPA's records list 2 violations for this system; none is health-based, and the most recent began in July 2020. For current results, consult the system's annual water quality report, EPA ECHO, or the WA state drinking water program.
Where can I find Rainwood's water quality report?
As a community water system, Rainwood must deliver an annual water quality report, called a Consumer Confidence Report, to its customers by July 1 each year, covering the previous calendar year. The system can provide a copy on request.
Other water systems in Thurston County
| Water system | County | Population served | Type | Source |
|---|---|---|---|---|
| Olympia City of | Thurston | 126,966 | Community | Groundwater |
| Lacey Water Department | Thurston | 105,178 | Community | Groundwater |
| Tumwater City of | Thurston | 51,802 | Community | Groundwater |
| Yelm City of | Thurston | 17,355 | Community | Groundwater |
| Tanglewilde Thompson Place 600 | Thurston | 7,900 | Community | Groundwater |
| Pattison 500 | Thurston | 4,643 | Community | Groundwater |
Related pages
Working with water-system records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.
About this data
Source: U.S. EPA Safe Drinking Water Information System (SDWIS) and SDWA violation records, via EPA ECHO, as published October 1, 2026 — AquaCensus refreshes it quarterly. See the methodology for how records are matched, cleaned and scored.
Cite as: AquaCensus, “Rainwood, PWSID WA5314730, Washington”, https://aquacensus.com/water-systems/washington/rainwood-wa5314730 (data as of October 1, 2026).